GRAPHIC: Link to International Mold Steel welcome page.
CONTACT US  
859.342.6000  
 
Home | About Us | What's New | Webinars | Videos | Contact Us
 

HOME --> MACHINING SERVICES

International Mold Steel
Machining Services

Milled Plates and Blocks from IMS
Top and Bottom or 6 Side Milling


"What could cost you hours, takes us minutes."

We recently milled a block 4.875" x 14-1/4" x 16-1/4" taking .375" off the top and bottom and taking .250" off the width and length. On a typical vertical machining center this would take anywhere from 3 to 4 hours. This includes setup as well as machine time. With our new equipment (see photos) it took us under an hour to setup and machine the block square 6 sides.

6 Side Milled Block 
Block Dimensions: .375" to 9.00" Thickness 
(2.75" to 31" Width X 2.75" to 31" Length) 

Top & Bottom Milled Plate 
Plate Dimensions: .375" to 11.81" Thickness 
Up to 31.50" Wide 
Up to 51.18" Long 

Tolerance 
Size: +.004” -.000 
Square: .001” per/ft

For closer tolerances please call us.

IMS SERVICES

Welcome

Machining Services

Savings Calculators

Discussion Forums

Testimonials

Heat Treat
 

 

 
 
  International Mold Steel, Inc. 
1155 Victory Place
Hebron, KY 41048 USA 
Tel: 859.342.6000
Fax: 859.342.6006
Sales E-mail: [email protected]
Literature E-mail: [email protected]
Web: www.imsteel.com
www.ssab.com www.sinto.com aboutus_okaya aboutus_daido


www.imsteel.com