Rubber Mold Steels
NAK80
NAK80 is a 40 HRC pre-Hardened, high performance, high precision, mold steel.
Applications include plastic molds, rubber molds, jigs & fixtures, and press
dies.
Features:
- Machines up to 20 percent faster than 30 HRc P20
- Pre-hardened to 38-42 HRC
- Uniform microstructure & hardness (40 HRC between surface & interior)
- Never needs stress relieving, even after heavy machining
- Highly weldable, HAZ gets softer not harder (re-age harden to bring back
to 40 HRC)
- EDM layer is easy to remove
All technical and engineering data and suggested procedures,
specifications and applications contained in this publication are for general
information only. Daido Steel, International Mold Steel and/or their
distributors disclaim any and all express or implied warranties of
merchantability, suitability for any particular purpose or use, or freedom from
infringement of any patent, trademark or copyright. NAK80® is a registered
trademark of International Mold Steel, Inc. and Daido Steel Limited.
|
|
