Rubber Mold Steels
NAK80
- Super clean, Vacuum-Arc Remelt manufacturing process.
- 40 HRc hardness.
- Age-hardened for uniformity of hardness throughout, even in heavy
sections.
- When welded, NAK leaves no witness lines after re-aging.
- Uniform grain structure with no pin holes, inclusions or hard spots.
- Machines up to 20% faster than 30 HRc P20 mold steels.
- Never needs stress relieving, even after heavy machining.
- Polishes to a superior No. 1 finish, even over welded areas.
All technical and engineering data and suggested procedures,
specifications and applications contained in this publication are for general
information only. Daido Steel, International Mold Steel and/or their
distributors disclaim any and all express or implied warranties of
merchantability, suitability for any particular purpose or use, or freedom from
infringement of any patent, trademark or copyright. NAK80® is a registered
trademark of International Mold Steel, Inc. and Daido Steel Limited.
|
|