HOME --> RUBBER MOLD STEELS --> PX5 --> MECHANICAL PROPERTIES

Rubber Mold Steels PX5 Mechanical Properties: Isotropy and Uniform Strength PX5's strength is approximately the same at the center and surface of the material, and that isotropy (T/L) is at least 0.05. Tensile Properties When designing deep cavities in molds, PX5's consistent toughness assures the mold center will have sufficient strength, and cracking problems are dramatically reduced. Toughness All technical and engineering data and suggested procedures, specifications and applications contained in this publication are for general information only. Daido Steel, International Mold Steel and/or their distributors disclaim any and all express or implied warranties of merchantability, suitability for any particular purpose or use, or freedom from infringement of any patent, trademark or copyright. PX5® is a registered trademark of International Mold Steel, Inc. and Daido Steel Limited.

PX5 Products Unique Characteristics Savings Calculator Benefits Mechanical Properties Physical Properties General Design Guidelines Processing Guidelines Technical Center